User Manual

9 PERFORM-VK User Manual
Pitch Guide
Sometimes it’s nice to get some about your singing. With the Pitch Guide, you can
see how close to the “true” note you are when you sing. It’s great to know that
you typically sing sharp or at, or simply struggle with a particular note or two.
To activate the Pitch Guide, press and hold the Pitch button. To deactivate the
Guide, press and hold again. When the pitch meter turns on, you’ll see the LED
ring light from red (at the bottom) to green (at the top). When the pitch meter
turns o, the LEDs will change from green to red.
The pitch guide shows whether you’re “on the note” (green LED’s), “at” (yellow/
red LED’s on the left hand side of the ring) or “sharp” (yellow/red LED’s on the
right hand side of the ring).
+48V (Phantom Power)
If you have a condenser mic, it’ll need power to function. You’ll need to press and
hold the 48V button for two seconds to turn phantom power on.
If you’re not sure what kind of mic you have, but you don’t hear any sound, it’s ok
to try 48V. It won’t damage a dynamic microphone.
Mic Control
To enable Mic Control, activate +48V.
Then, you’ll need to select your Mic Control Mode. This is done by holding the
+48V button and then pressing the 1, 2 or 3 button.
Button 1 sets Mic Control OFF. Use this when you have a condenser mic. If you
have another Mic Control mode set, you may inadvertently activate buttons on
the box as you sing.
Button 2 sets MP-75 mode. The Mic Control button cycles presets by default.
You can change Mic Control behavior by holding the Mic Control button and then
pressing the button on PERFORM-VK that you’d like to control. For example, if you
hold the Mic Control then press the Reverb button, the MP-75 will now control
on/o for Reverb. If you have an MP-76 connected but choose MP-75 mode,
the “top” button on the MP-76 will function just like the MP-75 button. The other
buttons will not do anything.
Button 3 sets MP-76 Mode. In this mode, the “Top” button controls Harmony.
The “Left” button controls Preset 1. The “Right” button controls Preset 2.
The “Bottom” button controls Preset 3.
MP-75 and MP-76 modes can control the following:
• Harmony
• Reverb
• Echo
• Tap Tempo
• Talk
• Preset 1
• Preset 2
• Preset 3
• Tone
• Anti-Feedback
• Pitch