User Manual

3 Harmony Singer 2 User Manual
1. Controls
(1) (2) (3)
(5)
(4)
(8)
(6)
(7)
(9) (10) (11) (12)
(1) HARMONY knob selects the harmonies that will be blended with your voice.
See Chapter 2: Using the Harmony Knob for details.
(2) LEVEL knob adjusts the volume of the harmonies.
(3) REVERB knob selects the type and amount of reverb eect on your voice.
The 3 types of reverb appear in order from the smallest space (Room) to the
largest (Hall). Adjusting the knob within your preferred reverb
space determines how pronounced the eect will be.
Turning the knob fully counterclockwise turns the reverb o.
(4) BATTERY LED indicates the battery level, with green showing full life,
yellow being partial life, and red to alert that the batteries
should be changed.
(5) TONE button engages a preset combination of adaptive EQ, compression,
de-essing, and noise gate. “Normal” and “Less Bright” settings can be
toggled by holding the Tone button and pressing the footswitch.
(6) ON/OFF LED lights when the eect is engaged.
(7) FOOTSWITCH bypasses the harmony eect,
but does not aect the reverb or Tone status.
(8) USB input accepts a micro USB cable for connection to a computer. Use the
VoiceSupport application to install rmware updates, and for other features
depending on your product.
Download VoiceSupport from www.tc-helicon.com/products/voicesupport/
(9) ON/OFF switch powers the pedal on and o.
(10) POWER input accepts a 9V power cable (not included).
(11) OUT jack accepts a balanced XLR cable for
connection to a mixer or active speaker.
(12) MIC input jack accepts a balanced XLR cable to connect your microphone.