HARMONY SINGER 2 Battery-Powered Vocal Effects Stompbox with Guitar-Controlled Harmony, Reverb and Tone User Manual
Harmony Singer 2 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
Harmony Singer 2 User Manual 1. Controls (1) (2) (3) (4) (5) (8) (6) (9) (10) (11) (12) (7) (1) HARMONY knob selects the harmonies that will be blended with your voice. See Chapter 2: Using the Harmony Knob for details. (2) LEVEL knob adjusts the volume of the harmonies. (3) REVERB knob selects the type and amount of reverb effect on your voice. The 3 types of reverb appear in order from the smallest space (Room) to the largest (Hall).
Harmony Singer 2 User Manual 2.
Harmony Singer 2 User Manual • Connect a microphone to the MIC jack Momentary Mode • Connect the OUT jack to a mixer, interface or active speaker • Connect a guitar to the Guitar Input jack on the right side of the pedal • Connect the left Guitar Output jack to an amplifier or mixing console The standard function of the footswitch is a latching style, meaning that each press of the footswitch turns the harmony on and off.
Harmony Singer 2 User Manual 3. Specifications Input Mic Input Impedance: Balanced: 2.68 kOhm Mic Input Level @ 0 dBFS: -42 dBu to +1 dBu EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu Mic input SNR: >104 dB Guitar Input impedance: 1 MOhm Guitar Input Level @ 0 dBFS: -7 dBU to 17 dBu Guitar Input SNR: >115 dB Output Output Impedance, Bal./Unbal.: 200/100 Ohm Output Full Scale: +1 dBu Dynamic Range: >104 dB, 20 Hz to 20 kHz Frequency Response: +0/-0.
Harmony Singer 2 User Manual
