User Manual

7 TC8210-DT User User Manual
Travel Period and Module Connection
All products in the TC Icon series behave similarly. If the plug-in is installed without a hardware unit connected, the plug-in will default to "demo mode." In this state,
sound is processed but no controls are available. Once a hardware unit is connected, all controls become available.
60 days Travel Period
If the hardware unit is disconnected, full functionality will be available for 60 days, after which the plug-in goes into "demo mode."
Download and install the
plug in
Connect Module Disconnect Module After 60 days Reconnect Module
Processing Only Full Fuctionality Processing and controls
available for 60 days
Processing Only Full Fuctionality Restored
Link to product page with store nder 60 day count down
Primary and Secondary Controls
After you have installed the plug-in and connected the TC8210 via USB, you can
begin adding the eect to your tracks. Adjustments to the eect are done with
2 sets of parameters:
Primary – the parameters that are adjusted using the physical switches of the
hardware module. These include common items such as reverb type, color, and
modulation.
Secondary – the parameters adjusted in the plug-in user interface window.
These include Input and Output level, Wet/Dry level, Early Color, Mod Rate,
Diuse, and the selection of Presets.
All of these parameters will be discussed later in this manual.