System 6000 Integrator

Interface and feature reference
System 6000 Integrator Manual (2014-08-20) 18
– To send a full Scene (with settings for all En-
gines) from the plug-in to the System 6000
MKII, click the “Send” button.
– Please note that this button is only en-
abled if there are System 6000 MKII set-
tings present in the plug-in that can be
sent to the System 6000 MKII.
– When sending a Scene from the plug-in to
the System 6000 MKII, you will be asked
to confirm that the current Scene in the
System 6000 MKII should be overwritten.
When you transfer a Scene from the plug-in
to the currently selected System 6000 MKII,
the current Scene in that System 6000 MKII
will be overwritten. Make sure that this is
what you want.
– To transfer the full scene from the System
6000 MKII to the plug-in, click the “Receive”
button.
Using a System 6000 Integrator
plug-in instance to back up data
from a System 6000 MKII
When you use an instance of the System 6000
Integrator on a track in your DAW/NLE project,
and when you transfer Scenes from your Sys-
tem 6000 MKII using the Receive button on the
Scene tab as described here, the Scene data is
stored within this particular instance of the
plug-in. This means you can transfer all rele-
vant data from one particular System 6000 MKII
frame into your software/project and store it, so
it can be reused later – even when you are work-
ing with another System 6000 MKII. This is a
powerful and flexible backup mechanism for all
your fine-tuned settings.
However, this also means that you have to make
sure that the project and the track with the plug-
in instance are not deleted. For more informa-
tion, see “Data storage in plug-in instances” on
page 11.
Project page – User Preset tab
Use the User Preset tab of the Project page to
transfer User Presets between the currently se-
lected System 6000 MKII and the plug-in.
Fig. 16.: Project page – User Preset tab
– To transfer all User Presets from the plug-in
to the System 6000 MKII, click the “Send”
button. This feature will only be available if
you have previously transferred System 6000
MKII into this plug-in instance.
– Please note that this button is only en-
abled if there are User Presets present in
the plug-in that can be sent to the System
6000 MKII.
– When sending User Presets from the
plug-in to the System 6000 MKII, you will
be asked to confirm that the current User
Presets in the System 6000 MKII should
be overwritten.