System 6000 Integrator

Interface and feature reference
System 6000 Integrator Manual (2014-08-20) 17
Recall page
Use the Recall page to access the currently se-
lected System 6000 MKII frame’s User Presets
and recall them – i.e., load them into the Engines
of the System 6000 MKII.
Fig. 14.: Recall page
Recalling User Presets
– Select the System 6000 MKII you want to
control using the “System 6000 MKII setup
page”.
– Switch to the Recall page.
– Select an Engine using the Engine tabs on
the left side of the window. The Preset that is
currently loaded into the selected Engine (if
any) is displayed in the upper right corner of
the page with the label “Current:”.
– Select a User Preset bank from the left col-
umn.
– Select a User Preset bank decade from the
middle column.
– Select a User Preset from the list on the
right.
– Click the “Recall Preset” button to recall
(load) the selected User Preset into the se-
lected Engine of the System 6000 MKII.
Updating the User Preset list
To update the list of User Presets for the current-
ly selected System 6000 MKII, click the “Retrieve
list” button.
Project page – Scene tab
Use the Scene tab of the Project page to transfer
complete Scenes between the currently selected
System 6000 MKII and the plug-in.
You can transfer Scenes…
– from a plug-in instance to a System 6000
MKII
– from a System 6000 MKII to a plug-in in-
stance.
Fig. 15.: Project page – Scene tab
A Scene encompasses settings for all Engines of
the System 6000 MKII and the routing. For more
information on Scenes, see your System 6000
MKII manual.