System 6000 Integrator

Interface and feature reference
System 6000 Integrator Manual (2014-08-20) 16
System 6000 MKII setup page
To access the System 6000 MKII setup page,
click the small illustration representing the TC
Icon in the upper left corner of the plug-in win-
dow.
To return to the previously selected page, click
the small illustration representing the TC Icon
again.
Fig. 12.: System 6000 MKII setup page
Device list / device selection
Select the System 6000 MKII you want to control
from the device list in the lower part of the plug-
in window.
If there are more System 6000 MKII frames on
the network than can be shown at a time, click
the scroll up/scroll down buttons to the right of
the list to browse the list.
Update Device List button
To update the list of System 6000 MKII frames
connected to the network, click the “Update De-
vice List” button.
Auto Update button
To have the plug-in automatically update the list
of available System 6000 MKII frames whenever
it is started, click the “Auto Update” button so it
is highlighted.
By default, this button is on.
Status page
Use the Status page to access basic information
about the currently selected System 6000 MKII.
Fig. 13.: Status page
The Status page shows basic information about
the currently selected System 6000 MKII:
– Name assigned to this System 6000 MKII
frame
– System 6000 MKII serial number
– System 6000 MKII IP: The Internet Protocol
address for the System 6000 MKII in your lo-
cal network
– Frame Software Version: The currently se-
lected System 6000 MKII frame’s software
version
– Name of the current scene
– Names of the algorithms loaded into the en-
gines of the currently selected System 6000
MKII.