System 6000 Integrator

Using System 6000 Integrator
System 6000 Integrator Manual (2014-08-20) 12
Fig. 4.: Inserting an instance of System 6000
Integrator into a Pro Tools project
Fig. 5.: Inserting an instance of System 6000
Integrator into a Logic Pro project
– If the newly inserted instance of the plug-in is
not automatically opened, open it manually,
as with any other plug-in.
Fig. 6.: New System 6000 Integrator plug-
in instance in a Pro Tools project
At this point, this instance of the plug-in has
not yet retrieved a list of available System 6000
MKII frames and is not connected to a particular
frame. Therefore, the status will be indicated as
“Not connected”.
– Click the “Update Device List” button. The
plug-in instance will start to collect informa-
tion about all accessible devices.
Fig. 7.: Device list update
After one or several System 6000 MKII frames
have been detected, select the frame that you
want to control with this plug-in instance from
the device list and click the “Connect” button
in the upper left corner. The plug-in will now re-
trieve User Presets from the selected device.
Fig. 8.: User Presets from the selected
System 6000 MKII frame are
transferred to the System
6000 Integrator plug-in.