System 6000 Integrator

Using System 6000 Integrator
System 6000 Integrator Manual (2014-08-20) 10
System 6000 Integrator
does not process audio
Please note that the System 6000 Integrator
plug-in does not process audio in your DAW
or NLE project in any way.
System 6000 Integrator is only used to transfer
control data (User Presets and Scenes) from
and to your System 6000 MKII frame(s).
To have your System 6000 MKII frame(s) process
audio, you need to make the required connec-
tions to the digital or analog audio inputs and
outputs as described in the System 6000 MKII
Setup/Hardware manual.
System 6000 Integrator
and TC Icon
Please note that System 6000 Integrator
does not replace TC Icon. Actually, both prod-
ucts supplement each other.
– Use TC Icon to…
– edit System 6000 MKII User Presets,
– configure system settings such as clock
source and rate and
– update the System 6000 MKII frame
software.
– Use System 6000 Integrator to…
– access your System 6000 MKII from your
DAW or NLE as efficiently as possible,
– store User Presets in your project and
– automate User Preset changes.
Setup / Networking
To use System 6000 Integrator, both the Mac or
PC running your host software and System 6000
Integrator and the System 6000 MKII frame that
you want to control have to be connected to the
same physical network – either directly or via a
network switch.
System 6000 MKII mainframe Remote CPU 6000
Computer running
host software and
System 6000 Integrator
Ethernet switch
Fig. 6.: Setting up your System 6000 MKII
so that it is accessible from the
computer running your host software
and System 6000 Integrator
Please note that only control data is transmitted
over the Ethernet switch shown in this illustra-
tion.
All information regarding network setup and
troubleshooting in the manual for your System
6000 MKII also apply to System 6000 Integrator.
In short: If the computer that you are using to run
TC Icon software can “see” your System 6000
MKII, System 6000 Integrator will see it as well.