Manual

PolyTune plug-in 1.05 Reference manual – 2015-07-01 6
Settings page
Settings page
PolyTune plug-in Settings page
Use the Settings page to set the following pa-
rameters:
– “Select Instrument”:
Select the instrument that you want to tune.
For more information, see “Setting instrument
type (guitar or bass)”.
– “Display Mode”:
Select between Needle and Stream Display
Modes for chromatic tuning. For more
information, see “Chromatic Tuning Display
Modes: Needle Mode and Stream Mode”.
– “Drop Tuning”:
Select standard tuning (E) or one of the
supported Flat Tunings. For more information,
see “Alternate tunings”.
– “Reference Frequency”:
Select standard pitch (440 Hz) or an
alternative reference pitch. For more
information, see “Changing the reference
pitch”.
– “Color Set”:
Choose between the standard color set (Red/
Green) and the alternative color set (Yellow/
Blue) for the display LEDs.
PolyTune plug-in main page with the
Yellow/Blue color set selected
After setting all parameters to the desired values,
click the OK button in the lower right corner to
return to the Main page.