User manual

PolyTune Clip English Manual 5
Setup
Setup
Ready…
The PolyTune Clip box should contain the follow-
ing items:
– 1 PolyTune Clip tuner
– 1 CR2032 button cell battery
– 1 multilingual quick guide
– 1 voucher for the free PolyTune Plug-in.
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
Set…
– Insert the battery into the PolyTune Clip as
described under “Inserting/replacing the bat-
tery”.
– Remove the protective film from the PolyTune
Clip display.
– Attach PolyTune Clip to the neck of your gui-
tar, and adjust the hinge. Chose whatever po-
sition you like – the display will automatically
adapt to PolyTune Clip’s position.
That’s it. There are no audio connections to
make. Both for acoustic and electric instru-
ments, PolyTune Clip will pick up the signal
with its built-in piezo sensor.
Important note regarding
your instrument’s coating
Depending on various factors such as age-re-
lated changes or the surface finish, there is a
possibility that your instrument’s coating may be
damaged by attaching this product.
In general, do not leave accessories such as
PolyTune Clip attached to your guitar longer than
necessary, as the rubber pad may adversely
affect the finish of your instrument, especially
when it is exposed to sunlight for extended pe-
riods of time.
Get ready for a new
tuning experience!
Tuning your instrument with PolyTune Clip is fast
and intuitive. If you don’t feel like reading the
manual, just strum your instrument and watch
the display. We think you’ll like what you see.
E A D G B E
E A D G B E
If you want to learn more – read on!