Quick Start Guide
(EN) Step 6: Bluetooth
Pairing
PLETHORA X3 can be paired via Bluetooth* with a mobile device running the TonePrint App (version 4.2 or higher). The TonePrint App can
be downloaded from the Apple App Store* or Google Play Store*.
Open Bluetooth Pairing
To open Bluetooth PAIRING mode on PLETHORA X3, follow these steps:
1. Put PLETHORA X3 into EDIT mode by ipping the PLAY/EDIT switch down to the EDIT position.
2. Scroll down to SETTINGS in the leftmost LCD display by rotating the EFFECT knob clockwise.
3. Press the EFFECT knob to enter the SETTINGS menu.
4. When in the SETTINGS menu, use the EFFECT knob to navigate GLOBAL > BLUETOOTH.
5. Select CONNECT by pressing the EFFECT knob. CONNECT will change to CONNECTING to indicate that PLETHORA X3 is now open to
pairing with your mobile device.
Pairing with a Mobile Device
To pair PLETHORA X3 with your mobile device, follow these steps:
6. Make sure Bluetooth is enabled on your mobile device.
7. Launch the TonePrint App (version 4.2 or higher) on your mobile device.
8. Go to the Settings menu in the TonePrint App by pressing the small cogwheel in the top right corner of the app window.
9. Under BLUETOOTH in the app’s Settings menu, select “Connect to a Bluetooth enabled pedal”.
10. Select PLETHORA X3 from the pop-up list of available Bluetooth devices.
When pairing is successful, PLETHORA X3 will automatically exit the SETTINGS menu and return to EDIT mode.
To conrm PLETHORA X3 is paired with your mobile device, repeat steps 1–4. If pairing was successful, the BLUETOOTH menu should
display CONNECTED.
NOTE: Only one device can be connected to PLETHORA X3 via either USB or Bluetooth at any one time.
*The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Apple App Store is a
trademark of Apple Inc. Google Play Store is a trademark of Google, Inc.
PLETHORA X3 Bluetooth Pairing Specications
22 23Quick Start GuidePLETHORA X3
Bypass mode True Bypass
Input connectors 2 x ¼" TS, unbalanced
Input impedance 1 MΩ
Output connectors 2 x ¼" TS, unbalanced
MIDI in / thru 2 x 5-pin DIN
Power input
Standard 5.5 / 2.1 mm 9 VDC, centre negative
>600 mA (included)
Controls
EFFECT knob, TONEPRINT knob, parameter knobs
(assignable), eect slot / MASH footswitches
(assignable), PLAY / EDIT selector switch,
BOARDS selector switch
Latency 0.8 – 2.4 ms
USB port Mini-B USB connector
Bluetooth
Version Version 4.2 Low Energy
Operating frequency 2.402 to 2.48 GHz
Channel Number 40
RF output power 8 dBm
Working distance
Up to 10 m measured in open space
(wall and structures may aect range of device)
Dimensions (H x W x D) 56.02 x 176.53 x 116.75 mm (2.2 x 7.0 x 4.6")
Weight 0.775 kg (1.71lbs)