Manual

7 NONLIN2 NATIVE User Manual
5. User Interface
5.1 Overview
There are two tabs along the left edge of the interface, that bring up the two
pages of controls. As a general note, the parameters, controls, and graphs are
color-coded as shown below:
The top part of the display:
• • Bypass: Press this to bypass or engage the NONLIN2 NATIVE. This makes
it easy for you to listen and compare the overall eect of your awesome
work
Tabs on the Left
• • Main: This brings up controls (yellow) for the input gain, output gain,
dry gain, wet gain (yellow), and controls (blue) and graphic envelope
display for the release envelope
• • Modify: This brings up controls (yellow) for reverb/twist , and controls
(blue) for lter/width
Controls
• • Any of the circular controls can be adjusted either by dragging on the
dials or numeric value in the box, or by double-clicking and entering a
numeric value.
Meters
• • Input L/R meters (0 to -60 dB range)
• • Output L/R meter (0 to -60 dB range)
• • Use the input and output gain controls in the MAIN page to adjust the
levels if required.
Near the Bottom
• • Assign Focus Fields: You can place your own favorite set of parameters in
the 6 focus elds. (See section 5.2.1 for more details)
Along the Bottom Left
• • Preset number, preset name, preset type, preset favorite, preset up/
down
Along the Bottom Middle:
• • Tool Tips shows useful information about the current selection
Bottom Right Corner:
• • Setup
• • Shopping cart
• • User Interface size adjustment
The controls and features are described in more detail in the following pages.
Assign
Pin
Focus Fields
Global Bypass
Tool Tips Window
Window Size
Adjustment
Setup and
Cart
Input
Meter
L/R
Output
Meter
L/R
Focus
Fields
1-6
Main Tab
Modify Tab
Envelope
Controls
Preset Up/Down Preset Name Preset Type
Preset Number Preset Favorite
Envelope Display