Manual

10 NONLIN2 NATIVE User Manual
5.2.2 Focus Fields
Each of the six Focus Fields along the bottom can be assigned to any of the
available controls. These useful assignments remain visible when you switch to a
dierent page. For example, you can adjust the release envelope controls while
you are on the Modify page.
Click on ASSIGN in the lower left, and you will notice that the control knobs will
become blank. (This is a good reminder that you are in ASSIGN mode.) Click and
drag any of the controls and drop it down onto the desired Focus Field 1 to 6.
You can also click the desired focus eld and then click the control to assign to it.
When nished assigning, select the ASSIGN button again.
Click on the PIN Icon inside the ASSIGN button, and the Assigned Focus Fields will
remain when presets are changed. The numeric values within the Focus Fields
will change to the new preset values.
In the example below, Focus Field 1 has become Dry Gain level by dragging the
control down and releasing it over the Focus Field 1 button. It will stay like this,
even when you move to the Modify page.
When a control is assigned to a Focus Field, its number will appear within the
control. In this example, there is a "1" in Dry Gain, as it is assigned to Focus Field 1.