LMn Manual

Interface and feature reference
LM2n / LM6n Manual 16
LM2n/ LM6n tabs/ screens:
Radar, PPM, Stats, Settings
Fig. 12.: Tabs
Use the four tabs on top of the LM2n / LM6n in-
terface to navigate to the four pages that make
up the plug-in’s interface:
Radar: Main Radar display.
See “Radar page” on page 17
PPM: PPM page, also displaying a smaller
version of the Radar.
See “PPM page” on page 21.
Stats: Statistical information.
See “Stats page” on page 22.
Settings: Units and other basic settings af-
fecting the Radar display, and access to log-
ging features.
See “Settings page” on page 23.
If you should also use the LM1n plug-in,
please note that the LM1n interface has no
tabs.
Main controls
Fig. 13.: Status indicator, Pause button, Reset
button
Reset button
To clear all current measurements and restart
meter revolution from the 12 oclock position,
click the Reset button.
Make it a habit to click the Reset button be-
fore a new measurement. This resets the De-
scriptors, the Radar and the true-peak meters.
Run the audio, and watch the radar and descrip-
tor fields update accordingly. It is normal that the
descriptors wait five seconds into the program
before showing the first readings, while the radar
updates instantly. The first five seconds of a pro-
gram are included in the descriptor calculations,
even though they are not shown instantly.
In LM6n, resetting measurements will also create
a new log file when the Create Log File param-
eter on the Settings page has been set to On.
Pausing measurements
Click the Pause button to the left of the Reset
button to temporarily pause metering and mea-
surements.