LMn Manual

Using LM2n/LM6n
LM2n / LM6n Manual 9
LM2n/LM6n features
– Loudness meter fully compliant with
– EBU R128
– BS.1770 - 3
– ATSC A/85 2013
– ITU -R B S.1770
– Universal Descriptors
– Presets for use in broadcast, music, post pro-
duction and film
– Offline measurements
– Supports mono and stereo sources
– Supports 5.1 sources (LM6n only)
– Advanced logging functionality (LM6n only).
Differences between
LM1n, LM2n and LM6n
This table shows the differences between the
three versions of this product: LM1n, LM2n and
LM6n.
Function LM1n LM2n LM6n
Audio channels 1.0 and
2.0
1.0 and
2.0
1.0, 2.0
and 5.1
PPM Meter No 1.0 and
2.0
1.0, 2.0
and 5.1
Interface size Very small Medium
and big
Medium
and big
Radar No Yes Yes
Logfile No No Yes
LM2n/ LM6n vs. LM2 and LM6
If you have been using the original TC Electronic
LM2 /LM6 plug-ins, you will find the following
major differences between these plug-ins and
LM2n/ LM6n:
– Installation is possible without a physical iLok
device (see “Installation” on page 4).
– The Radar display is available in two sizes
(medium and big).
– Offline processing capabilities have been im-
proved.
– There is a new “Surround channel order” fea-
ture.
– The interface colors can be desaturated.
– The log file format has been updated.
– There are now dedicated Max Momentary
Loudness and Max Short Term Loudness de-
scriptors.