User Manual MIMIQ DOUBLER Ground-Breaking Guitar Doubler Pedal with 3 Tracks
MIMIQ DOUBLER User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. About this Manual...................................................... 4 2. Introduction................................................................ 4 2.1 Unpacking............................................................
MIMIQ DOUBLER User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
MIMIQ DOUBLER User Manual 1. About this Manual 2.3 Setting up Thank you for spending your hard-earned money on this TC Electronic product! We have done our best to ensure that it will serve you for many years to come, and we hope that you will enjoy using it. Connect a 9 V power supply with the following symbol to the DC input socket of your TC Electronic effect pedal. This manual will help you learn understanding and operating your TC Electronic product.
MIMIQ DOUBLER User Manual 3.2 Switching 3.4 Effect controls (3) FOOTSWITCH - To turn the effect on, tap the footswitch. To turn the effect off, tap the footswitch again. (7) DUBS - Select the number of additional guitar layers that will be mixed with your original guitar signal. (4) INDICATOR LED - The LED lights up when the effect is switched on. (8) TIGHTNESS - This knob adjusts how much variation there is in the extra layers of guitar.
MIMIQ DOUBLER User Manual 4.2 Adjustment Example 2: In the amp’s FX loop It is likely that some experimentation will be required when you first start using the Mimiq Doubler in your intended environment. Even though it’s a simple pedal with only a few controls, finding the balance between settings to achieve your desired result may take some tweaking. FX Return Mimiq The 3 basic elements to keep in mind when making adjustments are layers, deviation (tightness), and mix.
MIMIQ DOUBLER User Manual 5.2 Switching between True Bypass and Buffered Bypass 6.2 Changing the battery To set the bypass mode, proceed as follows: If you need to change the battery of your TC Electronic effect pedal, proceed as follows: • Disconnect the pedal and turn it on its back. • • Unscrew the back plate of the pedal and look for the two small dip-switches in the upper left corner. Unscrew the thumb-screw on the back of the pedal and detach the back plate.
MIMIQ DOUBLER User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION MIMIQ DOUBLER FLASHBACK 2 DELAY Responsible Party Name: Music Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 MIMIQ DOUBLER EMC/EMI This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules.
