Manual Revision 2.1

43
paGe Head
operation
43
paGe HeadenGIne edIT paGe
Fader Group
Parameters/
Value fields
Output
Meters
Input
Meters
Overflow
Indication
Library Frame and Engine SelectorsName of the currently
recalled preset
Fader Group
Selector
Parameter
Pages
Link key
Fine Adjust
Mode
The Engine 1-4 Edit Pages
This is where you edit algorithm parameters.Parameters
in several algorithms are distributed on different pages. As
illustrated above the MD 5.1 has 6 pages: Main, Setup,
Expander,Compressor,LimiterandOutput.Dependingof
the quantity of parameters represented in the groups one
or more groups will be displayed.
Basic operation
• PressE1toE4toselectEngine.Parametersforthe
recalled algorithms are instantly available for editing.
• Selectaparametergroup.Intheexampleabove-aMD
5.1 algorithm - the groups are Main, Setup,
 Expander,Compressor,LimiterandOutput.
• AllparametersareassignedtotheFaderGroups.Select
Fader Group using the Fader Group selector.
• PressanyparameteranditisassignedtoFader6.
Overflow Indication
If internal overflow occurs this will be indicated on the
FrameandEngineTabsviaaredLED.
Fader User Group - Assign key
BypressingtheFader Group Selector Up key you enter
the User group. In this group you can assign any
parameter to any Fader. The User Fader group is stored
with a preset.
• PresstheLink key.
• SelecttheFaderyouwishtolinkaparameterto,by
pressing the field just above the fader.
• Presstheparameteryouwishtolinktotheselected
fader.
Bypass
The Bypass key will respond in different ways depending
on the recalled algorithm. See specific algorithm description.
In some algorithms the Bypass will work as a mute
function.
Naming a Preset
• PresstheNamefield.Akeyboardwillpopup.
 (Seethe“Namingdisplay”section).
• Typeinthenewname.
• PressEnter.
Parameter value - Fine Adjust
Any parameter value can be adjusted in two accuracies.
A Normal and a Fine Adjust - mode. To switch between the
twomodespresstheValueFieldsabovethefaders.
As shown in the illustration the Fine Adjust mode will be
indicated with two triangles in the value field.