Manual Revision 2.1

21
operation
updaTInG TC ICOn/remOTe Cpu mK II frOm a CenTral serVer
There are two ways of updating the software
Updating directly from the Internet
-iftheTCIconRemoteCPUMKII’sLAN2(Internet)
connection is connected directly to the internet, the
software can be updated directly.
See explanation on page 14.
Updating from a Central Server
- The software is downloaded, placed in a shared folder on
a central server and updated from there.
Updating directly from the Internet
• FirstofallyoushouldcheckwhetheryourIconsoftware
isup-to-dateornot.PressUpdateVersionInfoonthe
FrameSystemVersionpage
• MakesureyourSystem6000isconnectedtothe
InternetviatheTCIconRemoteCPUMKII’sLAN2
Internet connection. Status on the connection can be
seen on the Setup/net page.
 Itshouldsay“ConnectedtoTC”
Three indications can be given:
“Connected.TCWebsiteAvailable”.Thisindicatesthat
LAN2iscorrectlyconnectedtoTCElectronicsdownload
server. Go to the Update page and press “Update From TC
Website”.
TC Electronic does NOT have access to any files or
informationondevicesconnectedtoLAN2.
“Connected.TCWebsitenotAvailable”.Thisindicatesthat
LAN2iscorrectlyconnectedtotheinternetbutyouare
either on a closed network with no internet access, or the
download server at TC Electronic cannot be reached.
“LAN2NotConnected”.Youarenotconnectedtothe
internet. Please check network setup and all cables, - then
try again.
Updating from a Central Server
Updating TC Icon software from a shared folder on a PC
• ConnecttheLAN2connectiontoyourcomputersnetwork
connection. For a direct connection use a X-Coupled
ethernet cable. If connected via a hub, use standard
(non-X-coupled) cables.
• DownloadandunziptheTCIconcabfileandplacethe
file in a folder. This folder needs to be shared.
To learn about shared folders please refer to the sections:
- Shared folders PC - basics
- Shared folders Mac - basics
- found on the previous pages.
Then enter the correct Network Folder Path to the shared
folder containing the software on the Setup/Net page.
Example PC:
Example Mac: