Manual Revision 2.1

9
paGe Head
HW & installation
9
remOTe Cpu
Remote CPU front panel
Remote CPU rear panel
LAN 1
connection for
setups with
multiple frames
COM port 1 COM port 2
PS-2 connection
for PC keyboard
and mouse
Connection
for TC Icon
2 x USB
Type A
Standard
Connectors
Power In
100 - 240V
Connection for
VGA monitor
Power Key
SwitchespowerOn/Off.GreenLEDindicatespoweron
state.
Ethernet Connection
32 bit PCI Ethernet interface fully compliant with IEE
802.3u 10/100 Mbps CSMA/CD standards.
Theconnectortypeisa100Base-TRJ-45(CN13)
Connection for PC keyboard or mouse
AstandardPS2Y-splittermustalwaysbeusedwhen
connecting a PS2-mouse, a keyboard or both.
This cable is not supplied with the unit.
Connection for TC Icon
36 pin multi-cable connection for TC Icon.
TC Connection Cable.
Use the special TC Icon cable supplied with the
unitONLY!
USB Connection
USBconnectionforsomeTCproductswithUSB
connection. E.g. Reverb4000
Monitor
Byconnectingamonitorviathisstandard15pinD-Sub
you can have the exact same picture as displayed on the
TC Icon, running in parallel with the Icon. Color depth is 24
bit with a screen resolution of 640 x 480 pixels at 60 Hz.
Power
Connect100-240VAC,50/60Hzauto-select.
Rack-mounting Advice
• TheCPUunitshouldnotbeplacedinanenvironment
with a temperature exceeding 50 degrees Celsius.
• Donotcovertheventilationopeningsonthebackofthe
Remote CPU.
The cooling fan is activated according to the
temperature inside.
Com ports / RS232
For connection of TC units with RS232 interface. E.g. P2
andDB2.
Ethernet/LAN
connection for sw
updates etc.