Manual Revision 2.1

28
THe wIzard and alGOrITHm fIlTer
Type
This is where you make the most detailed selection of
presets to choose from.
• Specifyfromwhichtypesofpresetsyouwouldliketo
recall. Types varies depending on the selected Wizard
Category selected on the Mode page.
• Pressingthetopfieldineachcolumnwillselector
deselect the entire column.
• NowpressOKandandyouwillreturntotheWizard
“main-page”(seebelow).
On this page you will now have an overview of your
Wizard, Name and Algo Filter selections.
YoucanatanytimepressReset to cancel all Wizard
settings and obtain full access to all presets.
Algorithm Filter
To access; press the Algo tabontheWizard“main-page”.
Operation
• PressoneormoreofthesixCategory Filter keys for an
application specific selection of preset types.
• UsetheSlider and the Select key in the Algorithm Filter
section to select or de-select individual Algorithms.
• PressOK to exit.
Whether you now wish to do a standard preset recall from
the Factory/User recall pages; or use the Wizard function
to further narrow down the selection, you can only see and
recall presets matching the Algorithm Filter settings.
Example:YouwishtoselectbetweenvariousSurround
presets but only in 5.1.
Overview of selections via
Wizard, preset name Filter
and Algorithm Filter