Manual Revision 2.1

26
lIbrary - reCall
Library Recall
On the Library Recall page the following banks are
available for recall operations.
Scene
Gives access to the following preset banks:
• FactoryF1:SceneROMbank
• UserU1:UserScenebank
Routing
Gives access to the following preset banks:
• FactoryF1:ROMbank
• UserU1:UserScenebank
Engine 1-4
Gives access to the following preset banks:
• FactoryReverbbanks(ForReverb6000)*
• FactoryMaster(mastering)banks(ForMastering6000)*
• Userbanks
If both Mastering and Reverb options are installed, the
Factory button is used to switch between Reverb and
Mastering presets.
Recalling a Scene or an Engine preset
• PresstheRECALLtabtoselecttheRecallpage.
• Nowselectthelevelof:Scene,RoutingorEngine1-4.
• Selectwhichbankyouwishtorecallfrom:Factory
or User. If a System 6000 formatted PCMCIA card
is inserted in the Mainframe, card-banks will also be
available and displayed below the User banks.
• Selectpresetspressing:
 Bank,Decade(=tens)andpresetnumber.
(grayed out numbers indicates that the Decade is empty)
• PresstheRecall key to recall/load the preset.
When trying to load an algorithm that requires more
DSP power than currently is free, a Pop-up display
willasktoloadthe“EmptyEngine”presetintoan
Engineofyourchoice.The“EmptyEngine”presetis
located as preset 00 in the Reverb Music bank.
Search / Wizard Algorithm Filter
See next page.
Operation Level Tabs Bank Selectors
Function
Select
Tabs
Library, Frame and Engine selectors
Parameter Fader
values present in
the last modified
Engine.
Fader
Group
Selector
Search