Manual

ALC2
Loudness Pilot English Manual (2014-10-07) 95
Link parameter
The Link parameter defines how limiters work
together.
Dual Mono setting
►
If a threshold is exceeded in one channel,
only that specific channel is limited.
Stereo setting
►
If the threshold is exceeded in one of the
channels, both channels are limited. This
way, the stereo perspective of your signal is
preserved.
Profile parameter
Use the Profile parameter to optimize the adap-
tive true-peak limiter based on content, or based
on the output platform.
The available settings are:
►
Dynamic
►
AC3 Codec
►
Universal
►
Loud
►
Voice
For linear (baseband) delivery, and for most other
codecs including AAC, use “Dynamic” for sensi-
tive content, “Voice” for predominantly speech
or “Universal” for all-round adaptive settings.
For AC3 delivery, use the “AC3 Codec” Profile
setting.
For all settings except for “AC3 Codec”, the true-
peak threshold is the same for all channels. For
“AC3 Codec”, however, AC3 downmix headroom
is protected, while the dynamic properties are
the same as “Universal”.
Output section
Output Fader parameter
The Output Fader parameter is a post-limiter
fader. Parameter range is from -100dB to 12dB.