Manual

Icon Setup
Loudness Pilot English Manual (2014-10-07) 83
Devices page
Use this page to detect, control and assign the
devices in your local network.
Detect button
Click the “Detect” button to scan the network for
connected devices. All detected devices will ap-
pear in the list.
If you encounter problems when detecting con-
nected devices, please refer to “Networking ba-
sics and troubleshooting” on page 32.
Assigning devices to
the available slots
You need to assign a device to a slot of the
TC Icon software to control it. Each instance
of the TC Icon software can control up to eight
different devices.
►
Select a device from the list on the left side
of the screen.
►
Click one of the eight slots on the right side
of the screen to assign the selected device to
this slot.