Manual

Setting up Loudness Pilot
Loudness Pilot English Manual (2014-10-07) 34
Fig. 20.: OSX Network preferences
For further information, please refer to you oper-
ating system’s integrated help system.
Changing subnet mask and TCP/
IP address of a Loudness Pilot
To change the subnet mask and TCP/IP address
of a Loudness Pilot, you need to access it using
a computer running the TC Icon software. This
means that in case of an IP address conflict that
keeps you from accessing Loudness Pilot in the
first place, you need to change your computer’s
IP first as described in the previous section.
►
Launch the TC Icon software on your com-
puter.
►
Select the particular Loudness Pilot you want
to access.
►
Click on the Frame tab.
►
Select the System page.
►
Select the Setup subpage.
►
Select Net.
To change the IP address:
►
Select the IP address parameter.
►
Enter the new IP address.
►
Confirm by clicking Enter.
To change the subnet mask:
►
Select the IP Subnet Mask parameter.
►
Enter the new subnet mask.
►
Confirm by clicking Enter.