Manual

Setting up Loudness Pilot
Loudness Pilot English Manual (2014-10-07) 33
If your computer is using the same IP address as
a Loudness Pilot on the same network, you have
two options:
►
Alter the last octet (the last three numbers) of
your computer’s IP address or
►
Alter the last octet of the Loudness Pilot’s IP
address.
Changing your computer’s subnet
mask and TCP/IP address
If and where you can change the subnet mask
and IP address of your computer depends on…
►
the operating system you are using and
►
your account privileges.
In case of doubt, please consult your company’s
network administrator.
To find and change the TCP/IP
address and the subnet mask on
a computer running Windows:
►
Go to Control Panel / Network Connec-
tions / Internet Protocol (TCP/IP).
►
Set the TCP/IP address.
Fig. 19.: Windows Internet control panel
To find and change the TCP/
IP address and the subnet mask
on a computer running OSX:
►
Go to System Preferences / Network.
►
Select “Ethernet”.
►
Under “Configure IPv4”, select “Manually”.
►
Set the TCP/IP address.