Manual

Loudness Pilotstatus indicators and ports
Loudness Pilot English Manual (2014-10-07) 24
This section of the manual describes the de-
vice’s status indicators and connectors.
Please note that the number of front panel sta-
tus indicators and connectors on the device de-
pends on the hardware version you have pur-
chased.
Front panel indicators
Loudness Pilot has the following front panel sta-
tus indicators:
Fig. 15.: Front panel indicators on Loudness
Pilot with three SDI cards
Additional status information can be displayed
using TC Icon software – see “Obtaining Loud-
ness Pilot status information” on page 45.
PSU 1 and PSU 2 LEDs
The PSU 1 and PSU 2 LEDs indicate the status
of the two built-in power supplies.
LED color /
indication
Status
Green An external power is connect-
ed and the power supply is ful-
ly functioning.
Red There is a problem with the
power supply. Either there is
no external power connected,
or there is a problem at cer-
tain checkpoints in the relevant
power supply.
Please refer to the descriptions of the PSU con-
nectors in the “Back panel connectors” on page
27 section for more information.