Manual

Software: TC Icon and Loudness Pilot firmware
Loudness Pilot English Manual (2014-10-07) 14
►
Double-click the .CAB file.
An “Icon” application file will be shown.
►
Right-click the “Icon” application file and
choose “Extract…“ from the context menu.
In the dialog box that is shown next (“Select
destination”), select a folder where you can
easily find the application – e.g., the Windows
desktop.
►
Click “Extract” to extract the application to
the selected destination.
►
Launch the TC Icon application that you just
extracted by double-clicking its icon.
TC Icon will try to establish connections to all
connected TCdevices on a local network, in-
cluding your Loudness Pilot.
If a connection cannot be established, please
refer to “Networking basics and trouble-
shooting” on page 32.
If you experience technical problems during
software download or installation, please ask a
person with administrator privileges on this com-
puter for assistance.
Updating TC Icon software
To update the TC Icon software on your comput-
er when a newer version is released,
►
quit the TC Icon software if it currently run-
ning on your PC,
►
download and extract the newer version as
described in this section and
►
replace the currently installed version by
copying the newer version over it.