Manual

Software: TC Icon and Loudness Pilot firmware
Loudness Pilot English Manual (2014-10-07) 12
Operating Loudness Pilot requires a TC Icon
remote (sold separately) or a computer run-
ning the TC Icon software.
When you are working with a system involving
one or multiple Loudness Pilot units, you are in-
teracting with two types of software:
1. TCIcon software:
TC Icon is a software application that you in-
stall on the computer(s) which you are using
to access, configure, operate and update the
Loudness Pilot unit(s).
TC Icon software is available for Microsoft
Windows and Mac OSX operating systems.
TC Icon software is free and can be in-
stalled on multiple computers.
Downloading and installing TC Icon software
is described in this section of the Loudness
Pilot manual.
2. TC Loudness Pilot firmware:
Loudness Pilot firmware is the software in-
stalled on every Loudness Pilot.
Every Loudness Pilot comes pre-installed
with the most current firmware version avail-
able at the time of production. You can down-
load newer versions of Loudness Pilot firm-
ware from the TC website. Firmware updates
will contain bug fixes and/or new features.
Loudness Pilot firmware updates are free.
Use TC Icon software installed on your com-
puter (see above) to transfer firmware to your
Loudness Pilot unit(s).
Downloading and installing Loudness Pilot
firmware updates is described in “Updating
Loudness Pilot firmware” on page 75.
You should keep both the TC Icon software
running on your computer and the software
of your Loudness Pilot (the firmware) up to
date. Using up-to-date software versions en-
sures you benefit from bug fixes and the latest
features.