Manual

Technical specifications
Loudness Pilot English Manual (2014-10-07) 128
Inputs and outputs – Loudness Pilot SDI
Connectors 1 BNC In, 1 BNC Out. 75 Ohm
Bypass relay Input to output while powered off and during boot-up
Function Audio de-embed/embed, video thru
SDI formats support – SD 525i59.94, 625i50
SDI formats support – HD 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
1080p23.98, 24, 25, 29.97, 30
1080i50, 59.94, 60
SDI formats support – 3GA 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
1080i50, 59.94, 60
1080p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
SDI formats support – 3GB (2 streams) 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
1080i50, 59.94, 60
1080p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Complies with standards SMPTE 259M, 292M, 424M, 425M
Audio input/output selection SDI group 1-2, 3-4, 3G stream 1, 3G stream 2
Interface function (de-embed/embed) Synchronous, bit transparent
Input return loss Typ. 17dB, < 1.5 GHz, typ. 12dB, 1.5 to 3 GHz
Output return loss Typ. 18dB, < 1.5 GHz, typ. 12dB , 1.5 to 3 GHz
Relay bypass return loss Typ. 19dB, < 1.5 GHz, typ. 14dB , 1.5 to 3 GHz
Adaptive cable equalization (input) 480 m @ SD, 250 m @ HD, 150 m @ 3G, Belden 1694A
Jitter tolerance (input) – timing > 10 UI
Jitter tolerance (input) – alignment > 0.7 UI
Output jitter @ SD – timing < 0.25 UI
Output jitter @ SD – alignment < 0.22 UI
Output jitter @ HD – timing < 0.5 UI
Output jitter @ HD – alignment < 0.1 UI
Output jitter @ 3G – timing < 1.0 UI
Output jitter @ 3G – alignment < 0.25 UI
Signal Level (output) 800 mV +/- 5%
DC offset (output) 0 V +/- 0.5 V
Rise/fall time (output) < 700 ps @ SD, < 130 ps @ HD, < 120 ps @ 3G
Overshoot (output) < 5% of amplitude