Manual

LM2 (optional)
Loudness Pilot English Manual (2014-10-07) 117
Log Setup page
To configure Auto Logging,
►
switch TC Icon software to Base mode by
clicking the Icon symbol in the upper left cor-
ner of the window,
►
click the Auto tab on top of the window
►
click the Log Setup page button on the left
side of the window.
Fig. 55.: Auto Logging
– Log Setup page
Use the parameters on this page to set up log
file retrieval.
Auto log button
Click this button to enable Auto Logging for all
devices/Engines that have the respective Meter
button enabled on the Log Select page – see
“Log Select page” on page 116.
Log File Folder
Use the Log File Folder field to specify a fold-
er on your computer where retrieved log files
should be stored.
The folder you set here is a common folder for
all the products controlled from this particular TC
Icon software.
Log File folder defaults
►
The default log file folder for Microsoft Win-
dows is:
[C:] \users\ [your user name] \Documents\LM
►
The default log file folder for Apple OS X is:
[Root] /users/ [your user name] /
Documents/TC Electronic/
Interval field
Settings: 1 / 2 / 4 / 12 hours, 1 day, 1 week
Use the arrow buttons in this section to define
the interval for log file retrieval.
Day / Hour / Minute fields
Use the Hour and Minute fields to set a specific
time of day when the next log file should be re-
trieved. The clock is set in 24 hours format.
Additional log files will be retrieved in the inter-
vals specified using the Interval field.
E.g., if you set the Hour and Minute fields to 2
hours and 10 minutes and set the Interval field to
4 hours, log files will be retrieved at 2:10 am, 6:10
am, 10:10 am etc.
When you have set the Interval field to “1 Week”,
you can also set the day of the week when the
log file should be retrieved.
For devices running 24/7, you would usually
chose a time when log file retrieval does not in-
terfere with other activities.
E.g., you could retrieve the log file every Mond-
day at 01:05.