Manual

LM2 (optional)
Loudness Pilot English Manual (2014-10-07) 116
Log Select page
To activate Auto Logging,
►
switch TC Icon software to Base mode by
clicking the Icon symbol in the upper left cor-
ner of the window,
►
click the Auto tab on top of the window
►
click the Log Select page button on the left
side of the window.
Fig. 54.: Auto Logging
– Log Select page
Use this page to select the Frame(s) and Engines
in that Frame from which you want to collect log
files.
Loudness Pilot meter log file retrieval
On a Loudness Pilot, the Meter Engines M1 and
M2 are always available. Enable Auto Logging
from them by clicking the M1 and/or M2 buttons
on the Log Select page.
Button “LED” states
Grey
Indicates that this Engine holds a valid LM2 al-
gorithm, but no log file has been retrieved yet.
Green
Indicates that at least one log file has been re-
trieved from this Engine.
Yellow
Indicates that this Engine does not hold an LM2
algorithm.
Red
Indicates that there was a problem retrieving the
log file. Check that the connection to the Frame
is working.
Blue – blinking
Indicates that the log file is currently being re-
trieved from the specific Frame and Engine.
“Auto log is not available from this device”
If a product controlled by the Icon application
does not feature a Loudness Meter.