Manual

LM2 (optional)
Loudness Pilot English Manual (2014-10-07) 108
Peak Indicator parameter
Range: -12 to +3dBFS
Use the Peak Indicator parameter to specify the
value that should trigger the Peak indicator in
the upper right corner of the Radar display. E.g.,
if you set Peak Indicator to -1 dBFS, the PEAK
indicator on the Radar page will be lit when the
signal is -1dBFS or above.
True Peak Meters section
TP Meters button
Use the TP Meters button to switch the stereo
True Peak meters on the right edge of the LM2
on or off.
Fig. 51.: True Peak Input meters
Preset View section
Preset View button
Click the Preset View button to turn the Engine
View display on the right hand side of the display
on or off.
When Preset View is on, the two signal process-
ing engines and the two LM2 instances are dis-
played on the right hand of the display with the
currently active presets. When Preset View is off,
a larger part of the interface is available for the
True Peak Meters.