Manual

LM2 (optional)
Loudness Pilot English Manual (2014-10-07) 100
Reading the Radar display
Fig. 48.: Fig 3.: The LM2 Radar
Target Loudness is displayed at the “12 o’clock”
position of the outer LED ring, and at the radar
circle marking the transition from green to yel-
low.
The yellow numbers in the lower part of the dis-
play are the two descriptors Loudness Range
and Program Loudness.
Pausing and resetting
the Radar display
The Pause and Reset buttons to the left of the
display are the “transport controls” of LM2. They
are used to make the radar and descriptor mea-
surements run, pause and reset.
Click the Reset button to reset the Radar display
and the descriptors.
Setting up LM2
To change the current LM2 preset’s name and
adjust basic parameters, click the “Main” button.
To configure what information is displayed, click
the “Setup” button.