LCn English Manual

System requirements and installation
LCn Manual 7
Installing LCn
– Make sure your host software (Pro Tools) is
not running.
– Run the installer for the LCn plug-in. You may
need an administrator account name and
password to run the installer.
–
Fig. 6.: The LCn installer
– Read and accept the Software License Agree-
ment presented by the installer.
– Finish the installation of the LCn plug-in and
quit the installer.
– Launch your host software (Pro Tools) to use
the LCn plug-in or
– Launch the stand-alone version of the plug-
in:
– “LC2n Loudness Correct” or
– “LC6n Loudness Correct”
Activating your plug-in when
launching the host application
– If you have not activated the recently installed
plug-in as described under “Activating your
plug-in from the iLok License Manager” on
page 6, you will now be presented with a
dialog telling you that the plug-in needs to be
activated.
Fig. 7.: iLok Activation prompt in Pro Tools
– Review the plug-in name, make sure that this
is the correct computer to activate and click
on the “Activate” button.
– In the next dialog, select the plug-in you wish
to activate and click “Next”.
Fig. 8.: Selecting a license to activate
– In the next dialog, select the activation loca-
tion (the computer or your iLok 2 device) and
click “Next”.
Fig. 9.: Selecting a license location