LCn English Manual

Interface and feature reference
LCn Manual 21
LCn settings page
The parameters shown on the Settings page will
change based on the setting of the Watch Folder
Mode parameter. For the parameters that are
only available when Watch Folder Mode is en-
abled, see “Watch Folder mode” on page 24.
Fig. 15.: LCn settings in File mode
(Watch Folder mode disabled)
Fig. 16.: LCn settings with Watch Folder mode
enabled
Watch Folder Mode parameter
To enable Watch Folder mode, click the Watch
Folder mode check box. For more information,
see “Watch Folder mode” on page 24.
“When file is added”
drop-down menu
This parameter is only available when Watch
Folder mode is disabled.
To specify what should happen when you have
selected a file for processing, use the “When file
is added” drop-down menu. The available op-
tions are:
– Do nothing
– Analyze
– Analyze and Process
When you set this parameter to “Analyze”, the
“Analyze” button on the main page will be dis-
played as “Auto Analyze”, thereby indicating that
a file will immediately be analyzed when selected
or dropped on the LCn user interface.
When you set this parameter to “Analyze and
Process”, the “Analyze & Process” button on the
main page will be displayed as “Auto Analyze &
Process”, thereby indicating that a file will imme-
diately be analyzed and processed with the cur-
rent settings when selected or dropped on the
LCn user interface.