LCn English Manual

Interface and feature reference
LCn Manual 19
Surr. Ch. Order drop-down menu
(applies to LC6n only)
If you use the plug-in to process a 5.1 signal, use
the Surr. Ch. Order drop-down menu to specify
the order of the channels.
Target parameter
Use the Target slider to adjust the Program
Loudness target.
When you select a preset using the Preset drop-
down menu, the Target parameter will be set to
the required/adequate value – but if you want to
hit a different target, you can set a custom tar-
get here.
S Max parameter
According to new EBU R128 revisions, there is
a recommendation for short-form content such
as commercials and promos. Broadcasters can
now set a limit for the short-term loudness they
want to accept – e.g. -18 LUFS.
When you work with content that is not short-
form content, set the S Max slider to “Disregard”.