Quick Start Guide

Quick Start Guide
(EN)
Controls
(1) Delay Type – Select delay type, TonePrint 1-6, or
the looper.
(2) SUBDIV – Select the rhythmic subdivision of the
beat, or your own custom setting.
(3) DELAY – Adjusts the delay time.
(4) FEEDBACK – Determines the number of delay repeats.
(5) BANK/STORE – Press the switch up to toggle
between presets 1-3 or 4-6. Press the switch down to
store the current settings to the selected preset.
(6) LEVEL – Adjusts the level of the delay repeats.
(7) MASH LED – Indicates the intensity of
MASH functionality.
(8) Footswitches – Tap to select presets 1-3 or 4-6,
depending on the Bank 1/2 setting. Press and
hold a footswitch to engage MASH and control the
selected parameter.
(9) TAP – Press in rhythm to enter the delay tempo.
Also performs undo/redo in looper mode. Press and
hold footswitch to engage MASH and control the
selected parameter.
(10) INPUT – Connect your guitar to the Mono input
using a standard ¼" instrument cable. If using a
stereo signal, connect the left channel to Mono and
right channel to Stereo.
(11) OUTPUT – Connect a standard ¼" instrument cable
to the Mono output jack and to the next pedal in
your chain, or to an amplier. If using a stereo signal,
send the left signal from the Mono jack and the right
signal from the Stereo jack.
(12) EXP – Connect an optional expression pedal to
control parameters like delay time or feedback level.
(13) BYPASS – Select between True Bypass or Buered
Bypass operation.
(14) KILL DRY – Engage Kill Dry to remove the direct
signal, sending only the delay signal to the outputs.
(15) POWER – Connect a 9 V / ≥300 mA power supply.
(16) USB – Connect to a computer for rmware updates
and TonePrint editing.
(17) MIDI – Connect standard 5-pin DIN cables to
control preset changes, MASH, potentiometer values,
and more.
FLASHBACK 2 X4 DELAY
V 2.0
(1) (2) (3) (4) (5) (6)
(7)
(8) (9)
(10) (11) (12) (13) (14) (15) (16) (17)
(1) (2) (3) (4) (5) (6)
(7)
(8) (9)
(10) (11) (12) (13) (14) (15) (16) (17)