Flashback 2 X4 Delay

11 FLASHBACK 2 X4 DELAY User Manual
8. MIDI
The FLASHBACK 2 X4 is equipped with MIDI IN and THRU jacks, allowing an
external MIDI controller to control preset and parameter changes. An incoming
MIDI clock signal will also override the pedal’s own Delay Time knob, but will not
aect the Subdivision setting.
The following charts detail the control and program changes accepted by
FLASHBACK 2 X4. Note that the MIDI receive channel is 6.
Preset Changes
Initiating a program change will load the associated preset and un-bypass the
pedal. To bypass the currently-selected preset, either use program change 1
(all FX o) or use the bypass command (cc 12) if you need to toggle the same
preset on/o.
* Note that depending how the MIDI controller handles program change messages (0-127 or 1-128),
the program number may need to be 1 digit higher than what is listed in the chart.
Parameter Control
Note that the modiers (knobs) can control up to 3 user-selectable
parameters, so MIDI control may aect more than just the parameters listed.
Custom controller setups can be arranged via the TonePrint app, and each
TonePrint slot can store unique modier congurations.
9. Links
Support resources
• TC Electronic Support: tcelectronic.com/support/
• TC Electronic – product software: tcelectronic.com/support/software/
• TC Electronic – all product manuals: tcelectronic.com/support/manuals/
• TC Electronic user forum: forum.tcelectronic.com/
TC Electronic on...
• the Web: tcelectronic.com/
• Facebook: facebook.com/tcelectronic
• Google Plus: plus.google.com/+tcelectronic/
• Twitter: twitter.com/tcelectronic
• YouTube: youtube.com/user/tcelectronic
Preset number Program change
Bypass All 1
Preset A / Bank 1 2
Preset B / Bank 1 3
Preset C / Bank 1 4
Preset A / Bank 2 5
Preset B / Bank 2 6
Preset C / Bank 2 7
Preset number Control change
Subdivision (modier 2) 1
Delay time (modier 3) 2
Feedback (modier 4) 3
Delay level (modier 1) 4
Tap tempo 13
MASH switch (active FX engine) 5
Exp Pedal (jack must be unplugged) 11
Bypass (active FX engine) 12
Looper Record 6
Looper Play/Pause 7
Looper Play Once 8
Looper Undo/Redo 9
Looper Stop+Clear 10