User Manual FLASHBACK 2 X4 DELAY Flagship Delay Pedal Expanded with 3 MASH Switches, Tap Tempo, New Crystal, Analog and Tape Delays and 6 Delay Presets
FLASHBACK 2 X4 DELAY User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. About this Manual...................................................... 4 2. Introduction................................................................ 4 2.1 Unpacking.....................................................
FLASHBACK 2 X4 DELAY User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
FLASHBACK 2 X4 DELAY User Manual 1. About this Manual 2.3 Setting Up Thank you for spending your hard-earned money on this TC Electronic product! We have done our best to ensure that it will serve you for many years to come, and we hope that you will enjoy using it. Connect the included 9 V power supply, or a regulated 9 V power supply with at least 300 mA and the following symbol (center negative) to the DC input socket of your TC Electronic effect pedal.
FLASHBACK 2 X4 DELAY User Manual 3.2 Transferring TonePrints to your pedal 3.3 Editing TonePrints with the TonePrint App TonePrints can be transferred via USB connection or via TCs “Beaming” technology. The TonePrint app allows you to use TonePrints created by your favorite guitar and bass players. But this is only the start. Using the TonePrint editor within the app, you can create your very own signature pedal sounds.
FLASHBACK 2 X4 DELAY User Manual 4. Inputs, Output and Controls (3) (4) (10) (11) (5) (6) (1) (2) (12) (13) (7) (14) (15) (16) (9) (8) 4.1 Power / Computer connection (1) To power up your pedal, connect a power supply to its power input socket. The power input socket of your TC Electronic effect pedal is a standard 5.5/2.1 mm DC plug (centre = negative). Your TC Electronic effect pedal requires a 9 V power supply providing 300 mA or more.
FLASHBACK 2 X4 DELAY User Manual 4.5 Effect controls DYNAMIC Please note that the knob assignments on your TC Electronic pedal are the default assignments. Using the TonePrint app, you can rewire knobs so they control one or several parameters of your choice. This is a replica of the legendary Dynamic Delay initially introduced in the renowned TC 2290. The delay’s output level is actively altered by the dynamics of the input level.
FLASHBACK 2 X4 DELAY User Manual 5. Operation 5.1 Signal chain placement The FLASHBACK 2 X4 can be used several ways depending on your situation. While there isn’t necessarily a right and wrong use, here are the most common scenarios. Example 1: Before the amp’s input Input Chorus (mono or stereo Combo Amp Guitar Drive pedal Input FLASHBACK 2 x4 DELAY (Optional amp for stereo operation) When using the FLASHBACK 2 X4 before the amp’s input, it is generally best to place it after your other pedals.
FLASHBACK 2 X4 DELAY User Manual 5.3 Using the looper • Navigate to the Product Settings tab and click the 'Calibrate expression pedal' button. • Follow the instructions for calibration. • When the heel and toe positions have been established, click 'Done'. • Navigate to the Expression Pedal tab to assign parameters that will be controlled with the expression pedal.
FLASHBACK 2 X4 DELAY User Manual 6. Bypass Mode 7. Maintenance 6.1 True Bypass and Buffered Bypass explained 7.1 Updating the firmware True Bypass mode is a hard-wire bypass that gives absolutely no coloration of tone when the pedal is bypassed. This is the default mode for your effect pedal. TC may provide updates for the built-in software of your pedal, the firmware.
FLASHBACK 2 X4 DELAY User Manual 8. MIDI 9. Links The FLASHBACK 2 X4 is equipped with MIDI IN and THRU jacks, allowing an external MIDI controller to control preset and parameter changes. An incoming MIDI clock signal will also override the pedal’s own Delay Time knob, but will not affect the Subdivision setting. The following charts detail the control and program changes accepted by FLASHBACK 2 X4. Note that the MIDI receive channel is 6.
FLASHBACK 2 X4 DELAY User Manual 10. Specifications Connectors Inputs 2 x 1/4" TS, unbalanced Impedance ≥1 MΩ Outputs 2 x 1/4" TS, unbalanced Impedance 100 Ω Expression pedal input 1/4" TRS connector USB port Mini-B USB connector for firmware updates and TonePrint App MIDI In/Thru 5-pin DIN connector Bypass mode True bypass (buffered bypass selectable) Power Connector Standard 5.5/2.1 mm DC, center negative, 9 V, ≥300 mA (included) Physical Dimensions (HWD) 56 x 235 x 145 mm (2.
FLASHBACK 2 X4 DELAY User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION FLASHBACK 2 X4 DELAY Responsible Party Name: Music Tribe Commercial NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 FLASHBACK 2 X4 DELAY complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules.
