User Manual FLASHBACK 2 DELAY Legendary Delay Pedal with Groundbreaking MASH Footswitch, Crystal Delay Effect and Built-In TonePrint Technology
FLASHBACK 2 DELAY User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. About this Manual...................................................... 4 2. Introduction................................................................ 4 2.1 Unpacking........................................................
FLASHBACK 2 DELAY User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
FLASHBACK 2 DELAY User Manual 1. About this Manual 2.3 Setting up Thank you for spending your hard-earned money on this TC Electronic product! We have done our best to ensure that it will serve you for many years to come, and we hope that you will enjoy using it. Connect a 9 V power supply with the following symbol to the DC input socket of your TC Electronic effect pedal. This manual is available as a PDF download from the TC Electronic website.
FLASHBACK 2 DELAY User Manual Obtaining the TonePrint app 4. Inputs, Output and Controls If you own an iPhone, you can download the TonePrint app from Apple’s App Store. If you own an Android phone, you will find the TonePrint app on Google Play. Once you have the app, no additional downloads or in-app purchases are required. You can access all available TonePrints from within the app, and all TonePrints are free.
FLASHBACK 2 DELAY User Manual When using the Flashback 2 in mono, you can connect an external footswitch to the Stereo input jack with a TRS or TRS-to-TS cable to control the delay tempo. The external footswitch will also function as a dedicated ‘Stop’ switch when using the looper mode. Note that external tap tempo must be enabled in the editor software, and this causes both output jacks to operate in mono.
FLASHBACK 2 DELAY User Manual 5. Operation 5.1 Signal chain placement The Flashback 2 can be used several ways depending on your situation. While there isn’t necessarily a right and wrong use, here are the most common scenarios. Example 1: Before the amp’s input Input Guitar Flashback 2 Combo Amp Chorus Drive pedal (mono or stereo) Input (Optional amp for stereo operation) When using the Flashback 2 before the amp’s input, it is generally best to place it after your other pedals.
FLASHBACK 2 DELAY User Manual 5.3 Using the looper With the looper built into your Flashback 2, you can record and play back grooves and lines for playing along. You can even overdub your recording an unlimited number of times. The first round of recording always sets the length of the loop. The duration of a loop can be up to 40 seconds in mono and 20 seconds in stereo, regardless of how many overdubs you make. If an overdub exceeds the length of the loop, a third round of recording begins.
FLASHBACK 2 DELAY User Manual 7. Maintenance 8. Links 7.1 Updating the firmware Support resources TC may provide updates for the built-in software of your pedal, the firmware. Updating your TC pedal’s firmware requires... • TC Electronic Support: tcelectronic.com/support/ • TC Electronic – product software: tcelectronic.com/support/software/ • TC Electronic – all product manuals: tcelectronic.com/support/manuals/ • TC Electronic user forum: forum.tcelectronic.
FLASHBACK 2 DELAY User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION FLASHBACK FLASHBACK22DELAY DELAY Responsible Party Name: Music Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 FLASHBACK 2 DELAY EMC/EMI This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules.
