Manual
Table Of Contents
- Important Safety Instructions
- 1. Introduction
- 2. Getting Started
- 3. Top Bar
- 4. Top Menu
- 5. Compare
- 6. SPECTRO LAB
- 7. Processing Modules
- 8. Processing Chain
- 9. Module List
- 10. Library
- 11. Edit View
- 12. Algorithms in depth
- 13. Monitor Output
- 14. Master Meter
- 15. Timeline
- 16. Reference Tracks
- 17. Preferences Menu
- 18. Project and Audio files
- 19. Specifications
63 FINALIZER Desktop Application User Manual
9.3 Using Focus
With the Focus button at the top of the Modules List View, you can bypass the modules after the selected module in the processing chain. Note that the Limiter module
may become bypassed and the monitor output could possibly send out +0 dBTP signals and potentially be clipping in the following monitor chain.
• In the example below, the Dyn EQ Neutral 63 module was rst highlighted, before pressing Focus.
• All modules below this module, including the Limiter module will be bypassed while Focus is engaged. This allows you to audition the eect of the rst ve
modules only.
There are 3 modules that are always present in the Modules List: Prepare, Limiter and Export. Of these, there are only presets for the Limiter in the Library and the
Module Chain project presets does not include the Prepare or Export settings either.