Manual
Table Of Contents
- Important Safety Instructions
- 1. Introduction
- 2. Getting Started
- 3. Top Bar
- 4. Top Menu
- 5. Compare
- 6. SPECTRO LAB
- 7. Processing Modules
- 8. Processing Chain
- 9. Module List
- 10. Library
- 11. Edit View
- 12. Algorithms in depth
- 13. Monitor Output
- 14. Master Meter
- 15. Timeline
- 16. Reference Tracks
- 17. Preferences Menu
- 18. Project and Audio files
- 19. Specifications
52 FINALIZER Desktop Application User Manual
7.7 Stereo Width modules
The example below is one of the stereo width processing modules. Note that all the factory supplied stereo width module presets have the same controls as shown,
just at dierent adjustment settings.
Stereo width processing modules have the following controls:
• Side/Mid Ratio
• Mid Pan
• LR Balance
As the stereo width module controls aect the full band, there are no Control Sticks in the SPECTRO LAB views, and the controls are adjustable only in the
Edit View section
• Side/Mid Ratio has an adjustment range from 0.0 to 2.0.
• At ratio 0.0 the output is pure Mid signal = mono
• Ratio 1.0 is the original Side/Mid ratio
• At ratio 2.0 the Side signal is gained 6 dB compared to the Mid signal
• The Side/Mid parameter is intelligently loudness compensated, there are no major loudness changes when adjusting the Side/Mid ratio with most
music mixes.
• Mid Pan has an adjustment range from Left 50% to Right 50%
• The Mid Pan parameter will pan the Mid signal only. This can be used if the lead vocal, bass, snare/bass drum is slightly o center.
• LR Balance has an adjustment range from Left 50% to Right 50%
• This will aect the left/right channel gains.