Manual
Table Of Contents
- Important Safety Instructions
- 1. Introduction
- 2. Getting Started
- 3. Top Bar
- 4. Top Menu
- 5. Compare
- 6. SPECTRO LAB
- 7. Processing Modules
- 8. Processing Chain
- 9. Module List
- 10. Library
- 11. Edit View
- 12. Algorithms in depth
- 13. Monitor Output
- 14. Master Meter
- 15. Timeline
- 16. Reference Tracks
- 17. Preferences Menu
- 18. Project and Audio files
- 19. Specifications
46 FINALIZER Desktop Application User Manual
Threshold
• Threshold level can be adjusted by dragging the (T) control, or using the threshold control in the Module EDIT View. The adjustment range is +10.0 dB to –60.0 dB.
• Note that when the threshold (T) is adjusted, the physical position of the ratio (R) control in the graph will also move, but its actual value will not change; it will
remain the same for all threshold levels, unless adjusted by the ratio controls.
• During threshold adjustment using the (T) control, the vertical scale that appears will show the dB levels, and the current ratio of that band.
• As mentioned before, when Control Sticks / bands are linked, all threshold controls can be adjusted at the same time.
Ratio
• Ratio can be adjusted by dragging the R ball, or using the ratio control in the Module EDIT View. The range is from 1.00:1 to innity:1.
• The vertical scale that appears when adjusting Ratio equals 1 dB/div. if ratio is 1:1. If Ratio is 1:2 the scale will show 0.5 dB/div. indicating the output signal
compression.
• When Control Sticks / bands are linked, all ratio controls can be adjusted at the same time.