Manual

45 FINALIZER Desktop Application User Manual
As an alternative to the Link/Unlink button:
• Click on a (3C L), (3C M), or (3C H) ball and the respective stick/band will be highlighted. Any current linking will be removed.
• To link to another band, press Ctrl while clicking on the (3C L), (3C M), or (3C H) ball of the other stick. In this way, two bands can be linked, and this is something
that you can’t do with the Link/Unlink button (which links all three).
• You may also press Shift while clicking "start" and "end" band balls to select a range of bands. This may be extra useful with the 5 Band Compressor.
• When linked in this way, the Link on/o button turns o.
• Note that any current links will be unlinked if another (3C L), (3C M), or (3C H) ball is selected (unless Ctrl is still being held down).
Crossover Frequency
• The low and high crossovers (marked X) determine the frequency range of the compressor’s 3 bands. Adjust the crossovers by dragging the low and/or high (X)
balls, or using the low and high crossover frequency controls in the Module EDIT View. As the 2 crossovers are adjusted, the position of the 3 Control Sticks (3C L)
low band, (3C M) medium band, (3C H) high band, will adjust automatically to remain centered within each band.
• Dragging the (3C L) ball has the same eect as adjusting the low crossover.
• Dragging the (3C H) ball has the same eect as adjusting the high crossover.
• Dragging the (3C M) ball adjusts both the low and high crossovers at the same time, while keeping the same separation in octaves.
• Holding Ctrl and dragging the (3C L), (3C M), or (3C H) balls, or a (G) ball, allows the Gain (G) and crossover frequency to be adjusted at the same time. If the 3 (G)
balls are linked, then the adjustment aects all 3 gain controls.
• The low crossover frequency adjustment range is between 40.00 Hz and 5.000 kHz.
• The high crossover frequency adjustment range is between 80.00 Hz and 10.00 kHz.
• The minimum band width is 1 octave