Manual

41 FINALIZER Desktop Application User Manual
The example below is a High Shelf module:
7. 5 Dynamic EQ Modules
The Dynamic EQ Module has seven parameters:
• Frequency
• Bandwidth
• Threshold
• Maximum Gain Reduction
• Ratio
• Attack
• Release
The Dynamic EQ can be regarded as a compressor that operate at denable Bell EQ frequency band, set by the frequency, bandwidth, and maximum gain reduction
controls, with familiar compressor controls of threshold, ratio, and attack and release times.
• Frequency can be adjusted by dragging the DE (Dynamic EQ) top ball, or using the frequency control in the Module EDIT View.
• Bandwidth can be adjusted by dragging the BW ball, or using the bandwidth control in the Module EDIT View. The range is 0.2 to 4.0 octaves.
• Threshold level can be adjusted by dragging the T ball, or using the threshold control in the Module EDIT View. The range is 0.0 to –60.0 dB.
• Maximum gain reduction can be adjusted by dragging the G ball, or using the maximum gain reduction control in the Module EDIT View.
The range is 0.0 to –18.0 dB.
• Ratio can be adjusted by dragging the R ball, or using the ratio control in the Module EDIT View. The range is from 1.00:1 to innity:1.
• Attack and Release times can only be adjusted using their respective controls in the Module EDIT View. The adjustment range is 0.1 to 200 ms (attack) and 5 to
1500 ms (release).