Manual

ManualsBrandsTC Electronic ManualsAudio and Effects Plug-InsNext Generation Mastering Application for Mac* and PC

Table Of Contents

Important Safety Instructions
1. Introduction
2. Getting Started
3. Top Bar
4. Top Menu
5. Compare
- 5.1 Using REF
6. SPECTRO LAB
- 6.1 Real time and full track audio processing
- 6.2 Spectral Dynamic Contour (SDC)
- 6.3 Real Time Spectrum (RTS)
- 6.4 Average Spectral Curve (AVG)
- 6.5 SPECTRO LAB In Depth
7. Processing Modules
- 7.1 EQ Modules
- 7.2 5-Band EQ Modules
- 7.3 Low Cut and High Cut Modules
- 7.4 Low Shelf and High Shelf Modules
- 7.5 Dynamic EQ Modules
- 7.6 Compressor Modules
- 7.7 Stereo Width modules
8. Processing Chain
- 8.1 Prepare Module
- 8.2 Limiter Modules
- 8.3 Export Module
9. Module List
- 9.1 Saving a Module Chain
- 9.2 Recalling a Module Chain
- 9.3 Using Focus
- 9.4 Prepare Module
- 9.5 Export Module
- 9.6 Finalizer has Infinite Headroom
10. Library
11. Edit View
- 11.1 Saving a Module in the Library
12. Algorithms in depth
- 12.1 Prepare
- 12.2 Parametric EQs
- 12.3 Single Band Dynamic EQ
- 12.4 Full Band Compressor
- 12.5 3 Band Compressor, Legacy TC style
- 12.6 5 Band Compressor, Modern TC style
- 12.7 Stereo Width
- 12.8 Limiter
13. Monitor Output
- 13.1 Monitoring with Loudness Compensation
14. Master Meter
15. Timeline
- 15.1 Timeline Regions
- 15.2 Export Region
16. Reference Tracks
- 16.1 Using REF
- 16.2 EDIT View
- 16.3 Regions in Reference Tracks
- 16.4 Reference Track Trim
17. Preferences Menu
- 17.1 General Page:
- 17.2 Audio Page:
- 17.3 Cloud Page:
- 17.4 Keyboard Shortcuts Page:
- 17.5 About Page:
18. Project and Audio files
19. Specifications

33 FINALIZER Desktop Application User Manual

7.1 EQ Modules

In the simple example above, for the EQ module BELL DAMP 700 Hz, adjustments to the settings can be made as follows:

• Frequency change: click and drag the top ball (BL, abbreviation for Bell) and move it left and right to change the frequency

• Gain change: click and drag the (G) ball and move it up and down to change the gain

• Bandwidth change: click and drag the (BW) ball and move it left and right to change the width

Notes: As mentioned earlier in this manual, the EQ overlay curve can be turned on or o using the EQ overlay toggle button near the top left of the display. The button

will be slightly highlighted in colour when engaged.

If the EQ overlay is o, then the display will be similar to this example: