Manual

21 FINALIZER Desktop Application User Manual
2. RTS in B mode, Dierence ON
The Dierence button aects the six SDC curves, as described previously for the SDC, and does not aect the two RTS lled curves. It is used to view the dierence
between source track (A mode) and the processed track (B mode). Select it again to turn the dierence display o. Note that the Dierence button is only selectable
from the B mode display.
In the example above, the Dierence button is on, and so is the EQ overlay. The two lled curves of the RTS and the SDC curves are aected by the controls of Bell Damp
Mids EQ module. The lled areas of the SDC curves show exactly the spectral and dynamic changes between the source A and processed B, caused by the application
of the Bell Damp Mids EQ module. If the display gets too “busy” to visualize clearly, it may help to turn o the EQ overlay once the EQ controls are set, and turn o the
Dierence toggle in the RTS view.