Manual

20 FINALIZER Desktop Application User Manual
6.3.1 Examples of RTS
The following pages show some examples of using the RTS.
RTS in A Mode (prepared source track)
In the example above, the prepared source A is displayed, with the top lled-curve showing the real-time peak analysis, and the lower lled-curve showing a moving-
average real-time RMS analysis. These two moving curves are overlaid on the SDC spectral and dynamic content and its six contour curves. No EQ eects are shown,
as this example is the prepared source le. Note that the two lled RTS curves have the same colour as the “A” button, and as this is happening in real time, the RTS
curves are only shown when the track is playing.
RTS in B Mode (processed track)
1. RTS in B mode, example with one optional processing module included
In the example above, the Bell Damp Mids EQ module was included in the Modules List, and the processed output shows a dip in levels at the frequency of the lter.
Note that the two lled curves and SDC curves have the same colour as the “B” button.