Manual
Table Of Contents
- Important Safety Instructions
- 1. Introduction
- 2. Getting Started
- 3. Top Bar
- 4. Top Menu
- 5. Compare
- 6. SPECTRO LAB
- 7. Processing Modules
- 8. Processing Chain
- 9. Module List
- 10. Library
- 11. Edit View
- 12. Algorithms in depth
- 13. Monitor Output
- 14. Master Meter
- 15. Timeline
- 16. Reference Tracks
- 17. Preferences Menu
- 18. Project and Audio files
- 19. Specifications
16 FINALIZER Desktop Application User Manual
6.2.1 Examples of SDC
The following pages show some examples of using the SDC with A, B, and REF.
SDC in A Mode (prepared source track)
In this example, the prepared source le is displayed, showing the spectral and dynamic content and its six contour curves. No eects (modules) are shown, as this
is the pre-processed “before” source le. This includes the initial Level Normalization and Sample Rate Conversion, if applied (both located in the Prepare module).
Note that the curves have the same colour as the “A” button, and the top curve is brighter.
SDC in B Mode (processed track)
1. No processing modules except the Limiter
In this example above, the processed output is shown, but no processing modules have been inserted yet, only the nal Limiter module is in the chain. Note that the
curves have the same colour as the “B” button, and the top curve is brighter.